Woah, 5000 subscribers now on the Greg’s Maker Corner Youtube channel! I’d like to thank everyone of my subscribers, sponsors, twitter/ X followers who have helped me achieve this exciting milestone. Reflecting Back It has been a great journey, and I thought I’d take an opportunity to reflect back on my channel- and also where […]
The LDO Box Turtle project has been keeping me busy for the first part of this year. Once again, I’d like to thank LDO Motors (and specifically, Jason Bao) for sponsoring this project! I just dropped the Final Assembly video, which you can check out here. It covers all of the end steps including assembly […]
To kick off 2025, I started an LDO Box Turtle build. The idea behind this project is to bring multi-filament changing capabilities to open source / klipper based machines, like the Voron 2.4, Trident, and VzBot to name a few. So far, the project has been a lot of fun! But it is definitely an […]
New Project Alert! To start off the new year for content, I am in the process of preparing for the LDO BoxTurtle upgrade. This is going to put some new life into my Voron printer that I have in mind for this project, but more on that later. The purpose of this blog post is […]
Happy new Year, everyone! I hope you had a great 2024. It’s still December 29th, but I decided to finish the year up with a quick post. I’ll start by saying: Thanks to everyone who has subscribed and continues to watch my content! I know I am long overdue for some new content, both on my […]
Hello everyone! It has been a while since my last video and webpage entry, so I thought I’d drop a quick note. Busy Busy Busy! First things first- I am still around! I’ve taken a bit of a break from creating content over the last few months. In addition to my day job picking up, […]
In addition to 3d printing hobbies, I am a musician. I’ve been interested in playing music for as long as I can remember, way before I started my Maker journey. At the age of 10, I began piano lessons and built a good foundation taking music lessons and learning to sight read and the basics […]
Introduction Until I built a pair of Head(amame) headphones, I didn’t know what I was missing. I know that may sound a bit cliche, but it’s the honest truth! The difference between these headphones and those from Apple, Amazon, Skully Candy, Bose, Beats, or some other brand at a big box retailer is that Headamame […]
Welcome to Greg’s Maker Corner, Internet Site Edition! Hopefully, you are familiar with my Youtube Channel, Greg’s Maker Corner. The focus of my content has been mostly centered around 3d printing, tinkering, making, and electronics projects. I tend to focus more on the technical, and “tinkering”/DIY aspect of things, explaining the “how”, but I also […]
